Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to remove the handle of a Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon MK 2, 843, Ypsilon 2, Y2 - Years 2003-2011
Part: Handle
Operation: How to remove the handle of a Lancia Ypsilon

Do you want to replace the left external handle on the driver's side) of a Lancia Ypsilon? In this video we will see briefly how to disassemble the handle and remove it from the door housing. To be able to remove the lock we need a screwdriver. Using the screwdriver, unscrew the screw on the side of the door (as in the video), remove the left handle cover (if present), then slide the handle to the left of the door until it comes off. We remove the door opening handle and insert the new piece into the door. Finally we hook the handle and tighten it with the appropriate screwdriver.


Posted on 21 November 2023 by ScegliAuto



How to remove the handle to fold the front seat of a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / MK 1, Y1, Ypsilon 1, 840) Before we can start, we will have to go and open the front door of our Lancia Ypsilon. We then begin by lowering and holding the handle down to overt
How do you replace the handle of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / Y3, Ypsilon 3, 846, MK 3) To replace the handle in the latest version of the Lancia Ypsilon, we need to open the door and remove the plastic cap that hides a torx screw. This
How to replace the external handle on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Do you want to replace the external handle (right) on the passenger side on a Lancia Ypsilon? In this detailed video we see briefly how to disassembl

    Frequently Asked Questions

    • Ypsilon 2003-2011 - Why doesn't the Lancia Ypsilon boot open? Read Answer
    • Ypsilon 2011-2023 - How much does it cost to replace an external handle in the Lancia Ypsilon? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos