Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Rear Light on Lancia Ypsilon

Model: Lancia Ypsilon MK 3, Y3, Ypsilon 3, 846 - Years 2011-2023
Part: Tail light

Replace the rear light if damaged and install a new one. Here’s how to remove it. Open the boot, unscrew the securing screws located on the side above the light's plastic. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors). Replace the damaged bulbs with new ones (same size and voltage). Reconnect the power connectors and refit the light with the associated screws. Test the correct functioning of the previously installed bulbs by operating the control levers.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Lancia Ypsilon
How to Remove the Rear Light of a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In this video, learn how to remove the rear light of a Lancia Ypsilon. Open the boot lid, and using a screwdriver, unscrew the securing nuts located …
How to Replace the Rear Headlight Bulbs/LEDs on a Lancia Ypsilon
How to Replace the Rear Headlight Bulbs/LEDs on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Do you want to replace the rear headlight bulbs/LEDs on your Lancia Ypsilon but don't know how to proceed? Here's how to do it: open the boot and use…
How to replace the rear light bulbs of the Lancia Ypsilon.
How to replace the rear light bulbs of the Lancia Ypsilon.
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In this guide, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Lancia Ypsilon. First, l…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos