Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Cabin Light Bulb in Lancia Ypsilon

Model: Lancia Ypsilon Y3, Ypsilon 3, MK 3, 846 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Interior dome light bulb

See other generations:
Video tutorial

To change the small bulb in the interior ceiling light of the Lancia Ypsilon, first, position the car on a ramp or flat surface. Then, remove the part of the ceiling light that does not contain the bulb holder.

To do this, unlock the clips holding it in place using a small plastic lever found along its perimeter. Once this piece is removed, disconnect the electrical connections of the buttons included in it. Now, unscrew the two screws that secure the other part of the ceiling light.

Disconnect the wires and, after removing the clips that hold the element around the bulb holder, proceed to replace the bulb itself. Reassemble everything, and you're done!


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Lancia Ypsilon (2011-2023 / Y3, Ypsilon 3, MK 3, 846) Today we will discover the main instructions that will allow us to disassemble and replace the license plate bulbs of the Lancia Ypsilon, in simple a…
Lancia Ypsilon (2003-2011 / Y2, Ypsilon 2, MK 2, 843) To replace the number plate light on the Lancia Ypsilon, use a tool to lever off the glass cover of the bulb: this will be secured by a clip that nee…
Lancia Ypsilon (2003-2011 / Y2, Ypsilon 2, MK 2, 843) How do you replace the cabin filter on a Lancia Ypsilon? Here’s how to carry out the replacement: using a screwdriver or a cordless drill, remove the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos