Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the license plate light on the Lancia Ypsilon?

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y2, 843, Ypsilon 2, MK 2 - Years 2003-2011
Part: Light bulb
Operation: How to replace the license plate light on the Lancia Ypsilon?

In order to replace the Lancia Ypsilon license plate light, you need to use an object that acts as a lever to be able to disengage the glass cover of the bulb: this will be fixed by a clip that must be opened. At this point it will be possible to extract the bulb. With the same lever used previously, it will be necessary to disengage the bulb located between two blades. Once the old bulb has been removed, it will be possible to insert the new bulb which must in turn be placed between the two blades. At the end of the operation it will be possible to insert the glass cover again.


Posted on 26 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - What does the yellow warning light with a bulb in the Lancia Ypsilon mean? Read Answer
    • Ypsilon 2011-2023 - How to replace the parking light bulb in the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - What bulbs does the Lancia Ypsilon fit? Read Answer
    • Ypsilon 2003-2011 - How to replace the position light bulb on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - Which bulbs to use for the position lights of the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos