Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light Bulb on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Light bulb

To change the boot light bulb to a T10 LED bulb on the Lancia Ypsilon, use a flathead screwdriver to lever the clip at the bottom of the light lens to remove it. Be careful not to burn yourself on the bulb holder. Press the connector with the same screwdriver (in the video, it broke, so the lens was opened to allow the bulb to come out). Using a cloth, pull out the bulb. Take the new T10 LED bulb out of the packaging and insert it in place of the old one. Refit the clip and place it back in its housing.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulb in a Lancia Ypsilon
How to Replace the Rear Bulb in a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) In today's video, see how to replace the rear bulbs in the first series Lancia Ypsilon. First, obtain the bulbs you need to replace. You can find the…
How to Replace the Front Bulb on a Lancia Ypsilon
How to Replace the Front Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's video, learn how to replace the front bulb on a Lancia Ypsilon. First, purchase the specific unit according to your needs. Remember to onl…
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before starting, open the bonnet of your Lancia Ypsilon. Begin by unclipping and removing the inner cover of the blown bulb. Once done, rotate the ba…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos