Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to remove the door panel of a Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y2, 843, Ypsilon 2, MK 2 - Years 2003-2011
Part: Door panel
Operation: How to remove the door panel of a Lancia Ypsilon

Before we can start, we will have to go and open the door of our Lancia Ypsilon. So let's start by unscrewing and removing the screws that secure the door panel to the door itself. After that, we will have to go to disengage and extract the door panel from its seat, using a thin but strong tool to leverage. By doing so, we will have freed the door panel. At this point, we will need to unclip the electric plug and disengage the handle section. When we have completed this step, we will have finished the disassembly.


Posted on 8 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ypsilon 2011-2023 - How to remove the door panel of a Lancia Ypsilon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos