Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light on a Lancia Y

Model: Lancia Ypsilon MK 3, Y3, Ypsilon 3, 846 - Years 2011-2023
Part: Tail light bulb

Open and lift the tailgate, which will give you access to the two screws on the outer edge of the boot. Unscrew these screws, and now the headlamp will be secured only by three clips that you can release by pulling from the rear of the vehicle to disengage the clips. Disconnect the plugs present, and you can now work on the bulbs by simply unscrewing the bulbs along the entire headlamp. The replacement is complete; just retrace your steps for reassembly.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on a Lancia Ypsilon
How to Change the Time on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) Before you can start, sit in the driver's seat of your Lancia Ypsilon. First, activate the onboard computer and the instrument cluster by turning the…
How to reset the service light in a Lancia Ypsilon
How to reset the service light in a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) The selected tutorial video explains the procedure to reset the service light in a Lancia Ypsilon car. Get into the vehicle, insert the key into the …
How to Reset the "Tire Pressure" Light on a Lancia Ypsilon
How to Reset the "Tire Pressure" Light on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) Before you start, sit in the driver's seat of your Lancia Ypsilon. Begin by activating the instrument cluster by inserting the key into the ignition …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos