Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Lancia Ypsilon

Model: Lancia Ypsilon 846, Ypsilon 3, Y3, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

In this video, learn how to remove the rear light of a Lancia Ypsilon. Open the boot lid, and using a screwdriver, unscrew the securing nuts located at the side of the rear light with a socket or screwdriver.

Once the light is free from any constraints, detach it from the bodywork using a plastic lever. Replace any damaged bulbs with identical pieces of the same size and voltage.

Finally, refit the light: insert it back into the car's body after connecting the terminals, tighten the securing bolts, and close the boot.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to remove the front headlamp of a Lancia Ypsilon
How to remove the front headlamp of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before you can start, open the bonnet of your Lancia Ypsilon. Begin by loosening and moving the section of the front bumper near the headlamp, unscre…
How to Remove the Third Brake Light on a Lancia Ypsilon
How to Remove the Third Brake Light on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Replace the central stop light on a Lancia Ypsilon, as shown in this video: open the boot lid, and using a screwdriver, unscrew the securing screws o…
Replacing Front Headlight Bulb on Lancia Ypsilon
Replacing Front Headlight Bulb on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video, you will learn how to remove and replace the front headlight bulb on a second series Lancia Ypsilon. First, open and lift the bonnet; …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos