Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. : Y10

Lancia Y10 - Videoguide

Lancia Y10 (1985-1995 / MK 1)
How do you replace the windshield wiper blades on the Lancia Y10?
To be able to replace the windshield wiper blades on the Lancia Y10, first of all you need to remove the old blades, so that the end of the arm is free. Once …read all…
Posted on 26 March 2024 by ScegliAuto
Lancia Y10 (1985-1995 / MK 1)
How to remove the light switch on a Lancia y10
Today we are going to see how to remove the light switch on our Lancia Y10, with a little foresight you will be able to successfully complete this operation. …read all…
Posted on 25 November 2023 by ScegliAuto
Lancia Y10 (1985-1995 / MK 1)
How to remove the front seat of an Autobianchi Y10
Let's see how to disassemble the front seat of an Autobianchi Y10 into pieces after removing it from the passenger compartment. With a screwdriver we unscrew …read all…
Posted on 11 November 2023 by ScegliAuto
Checks and maintenance (1) Seat (1) Windscreen wipers (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos