Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Front Seat of an Autobianchi Y10

Model: Lancia Y10 MK 1 - Years 1985-1995
Part: Seat

Let's see how to dismantle the front seat of an Autobianchi Y10 after removing it from the cabin. Unscrew the securing pins of the side joints of the seat with a screwdriver, then use a lever to detach the side plastics of the seat. Remove the plastic (where the fabric is welded) on the seat base from the rest of the seat, then pull off the fabric of the backrest as shown in the video (remove the headrest of the seat). Replace the various coverings with new fabrics and finally reassemble the front seat in the car: screw the various fixing pins into the sliding rails.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Y10 (1985-1995 / MK 1) Today, see how to remove the indicator stalk on your Lancia Y10. With a bit of care, you will successfully complete this operation. First, mark the e…
Lancia Y10 (1985-1995 / MK 1) To replace the wiper blades on a Lancia Y10, first remove the old blades so that the end of the arm is free. Once the old blade is removed, lift the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos