Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Horn Button on the Steering Wheel

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Steering wheel

See other generations:
Video tutorial

This tutorial describes how to replace the horn buttons directly on the steering wheel. Using a lever (in the video, a small flathead screwdriver), remove the plastic button from its housing on the steering wheel.

Be careful of the internal mechanism, which consists mainly of a resistance spring. Install any compatible button in structure and size with the original, replacing the worn one. Do the same for the second button.

Finally, test the correct installation and the proper functioning of the buttons, which should produce an adequate sound when pressed.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel to Replace the Horn
Removing the Steering Wheel to Replace the Horn
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Before proceeding, activate the switch located on the dashboard that disables all installed airbags. The location of this device is clearly marked, a…
How to Remove the Steering Wheel and Airbag on the Land Rover Discovery 2 TD5
How to Remove the Steering Wheel and Airbag on the Land Rover Discovery 2 TD5
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this video tutorial, you will learn how to remove the steering wheel and airbag on the Land Rover TD5; this way, you can also remove the horn butt…
How to Replace the Horn on the Land Rover Discovery 2
How to Replace the Horn on the Land Rover Discovery 2
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this brief guide, follow the instructions to remove and replace the horn on the Land Rover Discovery 2. First, open the hood of your vehicle and s…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos