Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue on the Range Rover Sport

Model: Land Rover Range Rover MK 2 - Years 2012-2021
Part: AdBlue warning light

If the AdBlue warning light comes on in the instrument cluster of your vehicle, it means you need to refill the additive before the mileage indicated by the onboard computer. The following description provides all the instructions and the procedure to follow. The cap for refilling the additive on this vehicle model is located inside the engine compartment. Therefore, open the hood and look on the left side of the fender profile. To refill, remove the cap and proceed.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
How to Reset the AdBlue Warning Light on a Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the AdBlue warning light has turned on in the instrument cluster of your Land Rover Range Rover Sport, it means that the fluid in the emissions sy…
How to reset the AdBlue warning light in the Land Rover Range Rover Sport?
How to reset the AdBlue warning light in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the AdBlue warning light has come on in the instrument panel of our Land Rover Range Rover Sport, it means that the fluid of the anti-pollution sy…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos