Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Monitor Tire Pressure on the Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Onboard computer

To check and monitor the tire pressure on your vehicle, follow the instructions below in this description and in the video. First, get into the driver's seat and turn on the ignition. Using the controls on the left side of the steering wheel, navigate through the onboard computer functions until you reach the Service menu. Press the right arrow to access the tire pressure check function, then press the OK button to see the recommended pressure based on the vehicle's load type and the actual pressure detected.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Land Rover Range Rover
How to Reset the Service Light on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) In this guide, discover the procedure necessary to reset the tire pressure monitoring system (TPMS) light on the Land Rover Range Rover, including th…
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) Today, you will see in this brief guide the instructions to install or replace the Tire Pressure Monitoring System (TPMS) sensor on the Land Rover Ra…
How to Reset the Tire Pressure Light in the Range Rover
How to Reset the Tire Pressure Light in the Range Rover
Land Rover Range Rover (2012-2021 / MK 2) In today's video, you will see how to reset the tire pressure light in the Land Rover Range Rover. First, remember to check all four tires and, if ne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos