Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : -board computer

Land Rover Range Rover - -board computer

Land Rover Range Rover (2012-2021 / MK 2)
How to reset the Range Rover service
Let's see in today's video how to clear the maintenance expired message in the Land Rover Range Rover. First we get into the car and sit in the driver's seat. …read all…
Posted on 29 September 2022 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to Monitor Tire Pressure on Range Rover
In order to check and monitor the tire pressure on the car we can follow the instructions below in this description and in the video. First, access the …read all…
Posted on 11 May 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to reset the Range Rover service light
If you notice a red vehicle maintenance warning light when you start your Range Rover, don't worry because this is not a malfunction but a simple reminder. In …read all…
Posted on 3 April 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to set the time on a Range Rover Sport
Before we can begin, we will have to go and sit in the driver's seat of our Range Rover Sport. Let's start by activating the on-board computer by pressing the …read all…
Posted on 18 January 2024 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos