Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Range Rover - Engine oil

Land Rover Range Rover (2002-2012 / L322, MK 3)
Check the oil level in the Range Rover Sport L320
Today we see how to check the oil level in the Range Rover Sport. In most cars it is possible to check the lubricating oil level by means of the dipstick …read all…
Posted on 17 August 2022 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to change the oil on Range Rover
Changing the oil and filter on a Range Rover? Let's see how everything is replaced. We open the car door, pull up the engine compartment opening lever and lift …read all…
Posted on 11 December 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to change the oil and engine filter on a Range Rover Sport
How to change the oil and engine filter on a Range Rover Sport? Let's see how to proceed with the replacement: we lift the car on a column bridge and unscrew …read all…
Posted on 10 November 2023 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos