Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Timing belt

Land Rover Range Rover - Timing belt

Land Rover Range Rover (2012-2021 / MK 2)
How do you replace the seat belt of the Land Rover Range Rover?
In order to remove the seatbelt of the Land Rover Range Rover, you first need to lever the plastic trims located at the bottom of the seatbelt reel. Once these …read all…
Posted on 23 September 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to replace and adjust the timing chain of the Land Rover Range Rover 5.0L.
Today's guide will show us the main information on how to disassemble and replace the timing chain of the Land Rover Range Rover 5.0L. First, we need to …read all…
Posted on 17 May 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to replace timing chain on Range Rover
If we have to proceed to replace the timing chain on this car, we must remember that this type of maintenance operation is quite complex and must be carried …read all…
Posted on 9 June 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
Land Rover Range Rover Sport Timing Belt Replacement Guide
In this short guide we will see the main instructions on how to disassemble and replace the timing belt of the Land Rover Range Rover Sport. First of all, we …read all…
Posted on 14 September 2022 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
When to replace the timing belt on Range Rover sport?
The timing belt is a fundamental element for the operation and duration of the engine as it synchronizes the movements of the crankshaft with the camshaft …read all…
Posted on 11 May 2024 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos