Do it yourself
Frequently asked questions about cars and motorcycles

Land Rover Range Rover - Gearbox

Land Rover Range Rover (2002-2012 / L322, MK 3)
How to unlock the gearbox of the Range Rover L322

In this video we see how to emergency unlock the gearshift of the Range Rover L322: if the transmission is stuck in park, we can release it in emergency to …read all…
Posted on 29 March 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to unlock the automatic transmission in the Land Rover Range Rover?

In this tutorial, we can see how to unlock the automatic transmission in the Land Rover Range Rover, a useful operation in case we are left without battery or …read all…
Posted on 7 September 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to replace the automatic transmission oil on the Land Rover Range Rover.

In this video, we show you how to replace the automatic transmission oil on the Land Rover Range Rover. First, lift the car on a bridge and perform a diagnosis …read all…
Posted on 10 July 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to unlock the gear stick on a Range Rover Sport.

In this video we see how to unlock the gearbox of a Land Range Rover Sport with automatic gearbox stuck in "P" mode. First, turn on the ignition and remove the …read all…
Posted on 29 May 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How do I replace the Range Rover gear selector?

In order to replace the gear selector on the Range Rover you need to remove the cover from the top of the selector. This will allow you to remove the central …read all…
Posted on 2 March 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How do I unlock the automatic transmission on the Range Rover Sport?

To unlock Range Rover Sport's automatic transmission, the six pins that secure the gear selector trim panel to the center console must be unhooked. Therefore, …read all…
Posted on 16 February 2024 by ScegliAuto

Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos