Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Automatic Transmission Fluid on the Land Rover Range Rover

Model: Land Rover Range Rover MK 2 - Years 2012-2021
Part: Transmission

In this video, you will learn how to change the automatic transmission fluid on the Land Rover Range Rover. First, lift the vehicle on a lift and perform a diagnostic check to ensure everything is in order. Next, connect the hoses to the machine's manifold for flushing and replacing the automatic transmission fluid and start the procedure. Once the fluid is changed, drain the fluid from the oil pan into a container. After that, remove the old oil pan and filter to replace them with new ones. Finally, add the additive to the oil to keep both the oil and filter clean.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Range Rover (2002-2012 / L322, MK 3) If shifting has become particularly rough and the vehicle has lost its smoothness, the first step is to replace the automatic transmission fluid alon…
Land Rover Range Rover (2012-2021 / MK 2) In this tutorial, you will learn how to unlock the automatic transmission in a Land Rover Range Rover, which is useful if you run out of battery or i…
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the transmission fluid in a Land Rover Range Rover, lift the vehicle to access the bolts securing the oil pan located at the bottom of the…

Other guides you may be interested in

    Frequently Asked Questions

    • Range Rover 2012-2021 - How to unlock automatic gearbox on Range Rover sport? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos