Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Fluid in a Land Rover Range Rover?

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Transmission fluid

See other generations:
Video tutorial

To replace the transmission fluid in a Land Rover Range Rover, lift the vehicle to access the bolts securing the oil pan located at the bottom of the car. Once removed, open the drain plug of the transmission fluid reservoir: collect all the fluid in a properly positioned container.

To add new fluid, close the reservoir with the drain plug and insert the new fluid using a pump through the fill cap located on the left side of the reservoir.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Seat Belt in a Land Rover Range Rover?
How to Replace the Seat Belt in a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To remove the seat belt from a Land Rover Range Rover, first pry to detach the plastic trim located at the bottom of the seat belt reel. Once these t…
How to Unlock the Automatic Transmission in a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) In this tutorial, you will learn how to unlock the automatic transmission in a Land Rover Range Rover, which is useful if you run out of battery or i…
How to Reset the Service Light on the Land Rover Range Rover
How to Reset the Service Light on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) In this guide, discover the procedure necessary to reset the tire pressure monitoring system (TPMS) light on the Land Rover Range Rover, including th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos