Do it yourself
| ||||
|
How to change the differential oil on a Range Rover Evoque
Model: Land Rover Evoque
MK 1, L538
- Years 2011-2018 Lift the vehicle safely using a jack or jack stands. Locate the differential drain plug, which is usually located on the bottom. Place a container under the drain plug to collect the old oil. Remove the drain plug and let the old oil drain completely. Remove the fill plug to allow air to enter and facilitate draining. Once all the oil has drained, reposition the drain plug. Fill the differential with the new oil specified for your vehicle up to the appropriate level. Tighten the fill plug making sure it is securely fastened. It is important to use the oil recommended by the manufacturer and follow the specifications for your vehicle model.
Posted on 5 May 2024 by ScegliAuto
How to change the oil in the automatic transmission of the Range Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) Let's go through the steps required to replace the Range Rover Evoque transmission oil. First of all, we raise the car and begin to identify the gear
Resetting the service light of the Land Rover Range Rover Evoque MK1.
Land Rover Evoque (2011-2018 / MK 1, L538) In this video we see the oil change of the Land Rover Range Rover Evoque engine being carried out; we need to reset the system that warns us, with a
How to reset the oil light on Range Rover Evoque
Land Rover Evoque (2018-2024 / MK 2, L551) In this video tutorial we can see how to reset the oil change warning light on Land Rover Evoque. When you see the oil change message, the first thin Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |