Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Gear oil

Land Rover Evoque - Gear oil

Land Rover Evoque (2011-2018 / MK 1, L538)
How to change the differential oil on a Range Rover Evoque
Lift the vehicle safely using a jack or jack stands. Locate the differential drain plug, which is usually located on the bottom. Place a container under the …read all…
Posted on 5 May 2024 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to change the oil in the automatic transmission of the Range Rover Evoque
Let's go through the steps required to replace the Range Rover Evoque transmission oil. First of all, we raise the car and begin to identify the gearbox oil …read all…
Posted on 28 September 2022 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos