Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Brake pads

Land Rover Evoque - Brake pads

Land Rover Evoque (2011-2018 / MK 1, L538)
Land Rover Evoque Rear Brake Pad Replacement 1
Let's find out the procedure necessary to remove and replace the rear brake pads of the Land Rover Evoque. First of all we lift the car and go to remove the …read all…
Posted on 7 July 2022 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Replacing the brake pads on Range Rover Evoque
Remove the affected front wheel by unscrewing its bolts and jacking up the car and securing it. Unhook the front attachment of the caliper and unscrew the rear …read all…
Posted on 7 March 2024 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to change the rear brake pads on a Range Rover Evoque
How to change the rear brake pads on a Range Rover Evoque? We see. We lift the car on a column bridge up to the desired height, immediately after we go to …read all…
Posted on 27 November 2023 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos