Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Replacing the brake pads on Range Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Brake pads
Operation: Replacing the brake pads on Range Rover Evoque

Remove the affected front wheel by unscrewing its bolts and jacking up the car and securing it. Unhook the front attachment of the caliper and unscrew the rear bolts with an Allen key. At this point you can extract the brake pads as shown in the video. At this point, widen the piston that holds the pads as the new ones will obviously be much thicker than the worn ones you removed. Since you are at it, clean this braking area and proceed backwards to reassemble the new pads and the wheel. Bye!


Posted on 7 March 2024 by ScegliAuto



How to change the rear brake pads on a Range Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) How to change the rear brake pads on a Range Rover Evoque? We see. We lift the car on a column bridge up to the desired height, immediately after we
Land Rover Evoque Rear Brake Pad Replacement 1
Land Rover Evoque (2011-2018 / MK 1, L538) Let's find out the procedure necessary to remove and replace the rear brake pads of the Land Rover Evoque. First of all we lift the car and go to rem
How to maintain the parking brake on the Range Rover Evoque.
Land Rover Evoque (2018-2024 / MK 2, L551) In this video we see how to put the parking brake of the Range Rover Evoque in maintenance mode and - above all - how to remove it from maintenance m

    Frequently Asked Questions

    • Evoque 2011-2018 - What is the price of Range Rover Evoque brake pads? Read Answer
    • Evoque 2011-2018 - How much does it cost to replace the brake pads on my Land Rover Evoque? Read Answer
    • Evoque 2011-2018 - How to unlock the automatic brake on Range Rover Evoque? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos