Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Battery Replacement on Range Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Battery
Operation: Battery Replacement on Range Rover Evoque

Does the Range Rover Evoque battery need to be replaced? Let's see the replacement. We open and lift the front hood by releasing the release lever of the same. Once the engine compartment is open, we will find the battery at the top right (under the metal bar). We disassemble the clamping pins of the battery terminals with a key suitable for disassembly, we unscrew the clamping screws of the metal bar. We remove the bar, the plastic cover and remove the battery from the engine compartment. We replace the old battery with a new one (same voltage). We close the bonnet at the end of the maintenance.


Posted on 1 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Evoque 2011-2018 - Where is the auxiliary battery located in the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is the auxiliary battery of the Land Rover Evoque located? Read Answer
    • Evoque 2011-2018 - Where is the battery located on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What is the cost of the Evoque auxiliary battery? Read Answer
    • Evoque 2011-2018 - Where is the Range Rover Evoque battery located? Read Answer
    • Evoque 2018-2025 - Where is the battery located in my Land Rover Evoque? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos