Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In this new mini guide, we will help you complete the procedure that allows you to manually reset the service light on the instrument panel of your first-generation Range Rover Evoque. First, reach the driver's seat inside the vehicle, then open the door and start the instrument panel.

Once the instrument panel of your Range Rover Evoque is on, you must simultaneously press both the accelerator pedal and the brake pedal for about a minute. Finally, release both pedals and the service light reset procedure is complete.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Range Rover Evoque
How to Reset the Service Light on a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To manually and correctly reset the service light on the instrument cluster of your Range Rover Evoque, follow the steps outlined in this mini guide.…
How to Reset the Service Light on a 2020 Range Rover Evoque
How to Reset the Service Light on a 2020 Range Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) The procedure to correctly reset the service light on your 2020 Range Rover Evoque is very simple. Just follow these steps to do it without any diffi…
How to Reset the Service Light on a Range Rover Evoque
How to Reset the Service Light on a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this short tutorial video, you will learn how to reset the maintenance light on a Range Rover Evoque. Start by turning on the ignition with the ST…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos