Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Service warning light

In this short tutorial video, you will learn how to reset the maintenance light on a Range Rover Evoque. Start by turning on the ignition with the START/STOP button, but do not start the engine. Now press the "ok" button located on the right side of the steering wheel to access the menu. Use the navigation arrows to scroll through the options until you reach "service menu" and press "ok" again to enter. Scroll down to the "HBA sensitivity" option and hold the down arrow button along with the TRIP button for about ten seconds. Now you can turn off the ignition and turn it back on to verify that the reset was successful.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Range Rover Evoque
How to reset the service indicator on the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this new mini guide, we will help you complete the procedure that allows you to manually reset the service light on the instrument panel of your f…
How to Reset the Service Light on the Range Rover Evoque
How to Reset the Service Light on the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In today's video, we will see how to reset the expired service message on the Land Rover Range Rover Evoque. First, we recommend performing regular m…
How to Reset the Service Light on a 2020 Range Rover Evoque
How to Reset the Service Light on a 2020 Range Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) The procedure to correctly reset the service light on your 2020 Range Rover Evoque is very simple. Just follow these steps to do it without any diffi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos