Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Disassembly and replacement of the steering wheel of the Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Steering wheel
Operation: Disassembly and replacement of the steering wheel of the Land Rover Freelander

In this guide, we will see step-by-step instructions that will allow us to disassemble and replace the steering wheel of the Land Rover Freelander in simple steps. First, we get into the car and begin to disassemble and remove the steering wheel airbag. To do this, we unscrew the screws that we find on the back of the steering wheel, finally disconnecting the electrical connector of the airbag, as shown in the video. At this point, we use a socket wrench to unscrew the central screw, removing the steering wheel in the straight position. We replace and apply the opposite procedure for reassembling the steering wheel!


Posted on 18 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Freelander 2006-2016 - What does the steering column locked message on Land Rover Freelander Mk2 mean? Read Answer
    • Freelander 2006-2016 - What can cause power steering problems on Land Rover Freelander? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos