Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to remove the airbag on Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Airbags
Operation: How to remove the airbag on Land Rover Freelander

In this video tutorial we can see how it is possible to disassemble the airbag in the Land Rover Freelander. To do this you need a screwdriver, bent at the end and a 50 torx key to remove the main screw. On the left side of the steering wheel there is a small hole where you have to insert the tip of the bent screwdriver, you have to find the internal hook with the tip and you have to pull. You must carry out the same procedure on the other side of the steering wheel, at this point the airbag cover can be removed; unplug the connectors. Once the airbag has been removed, you can safely remove the steering wheel.


Posted on 23 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Freelander 2006-2016 - Where is the driver's airbag located on the Land Rover Freelander? Read Answer
    • Freelander 2006-2016 - How do I remove the driver's airbag on Range Rover Freelander2? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos