Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Steering wheel

Land Rover Freelander - Steering wheel

Land Rover Freelander (1997-2006 / Freelander1)
Disassembly and replacement of the steering wheel of the Land Rover Freelander
In this guide, we will see step-by-step instructions that will allow us to disassemble and replace the steering wheel of the Land Rover Freelander in simple …read all…
Posted on 18 January 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to remove the Freelander steering wheel
Do we want to replace the steering wheel of our Land Rover Freelander? Let's see the disassembly of the airbag and the steering wheel. We disconnect the …read all…
Posted on 28 January 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How we disassemble the steering wheel with airbag on Land Rover Freelander
How do we remove the steering wheel with airbag on Land Rover Freelander? Very simple operation if you follow the various steps, we see in this guide how to …read all…
Posted on 16 October 2023 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos