Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Freelander - Clutch

Land Rover Freelander (2006-2016 / Freelander2)
How do you replace the Land Rover Freelander clutch master cylinder?
In order to replace the Land Rover Freelander clutch cylinder, the panel located behind the pedal unit on the driver's side must be removed: once the panel has …read all…
Posted on 28 December 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How do you replace the Land Rover Freelander clutch master cylinder?
In order to replace the Land Rover Freelander clutch master cylinder, the car must be lifted so that the right front wheel is not in contact with the floor: in …read all…
Posted on 22 November 2022 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
Land Rover Freelander 2.0 Diesel clutch removal instructions
In this video tutorial we will see the main instructions to be able to disassemble the clutch of a Land Rover Freelander 2.0 Diesel. First of all we lift the …read all…
Posted on 10 March 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to remove the clutch on Land Rover Freelander
Let's see in this video how to remove the clutch on Land Rover Freelander. We disconnect the battery terminals to safeguard the parts of the car; we lift the …read all…
Posted on 25 October 2023 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos