Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Freelander - Lock

Land Rover Freelander (2006-2016 / Freelander2)
How to replace the door lock actuator of the Land Rover Freelander.
Today we discover the guide on how to disassemble and replace the actuator of the front door lock of the Land Rover Freelander. First, we open the front door …read all…
Posted on 8 December 2023 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to replace the door lock of the Land Rover Freelander.
Below we will show you the main steps that will allow us to disassemble and replace the lock on the front door or central locking of the Land Rover Freelander. …read all…
Posted on 4 May 2023 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
Replacing the lock on Land Rover Freelander 2
Bye! Today we show you how to replace the lock on Land Rover Freelander second series. Remove the short part of the handle as shown in the video, i.e. …read all…
Posted on 6 March 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to change the door lock of Land Rover Freelander 2
How to change the lock of a Land Rover Freelander 2? We remove the door panel of the Freelander 2 to remove the door lock. We disconnect the battery terminals …read all…
Posted on 28 January 2024 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos