Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Land Rover Freelander - Light bulb

Light Bulb Land Rover Freelander (2006-2016 / freelander 2)

Land Rover Freelander (2006-2016 / Freelander2)
How to Remove the Front Headlamp of the Land Rover Freelander 2.2 TD4?
To replace the front headlamp of the Land Rover Freelander, first lift the bonnet and remove the screws securing the old headlamp. Once loosened, disconnect …Read all…
Posted on 28 June 2026 by ScegliAuto
Airbag (1) Car stereo (9) Battery (4) Air vents (2) Control arm (1) Transmission (1) Spark plugs (2) Convertible top (1) Body (2) Key (8) Trunk lock (2) Timing belt (13) V-belt (3) Onboard computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Differential (4) Brake rotors (1) Headlight (3) Tail light (2) Fog lights (1) Diesel particulate filter (1) Air filter (9) Cabin air filter (7) Diesel fuel filter (10) Oil filter (1) Parking brake (2) Clutch (5) Light bulb (1) Headlight bulb (6) Handle (2) Engine (1) Starter motor (1) Engine oil (3) Power steering fluid (1) Clock (1) Door trim panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (7) Car door (2) Instrument cluster (3) Fuse box (4) Door lock (5) Suspension system (1) Side mirror (1) Warning light – error code (8) Tire pressure warning light (2) Service warning light (21) Engine mount (1) Center console tunnel (1) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos