Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Freelander - Headlight

Land Rover Freelander (2006-2016 / Freelander2)
How to remove the headlight of the Land Rover Freelander?
In this tutorial we can see how to remove the headlight in the Land Rover Freelander 2, a very simple and fast operation. Before proceeding, make sure that the …read all…
Posted on 16 July 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
Disassembly of the headlights on the Land Rover Freelander 2
Let's find out how to remove the headlights on the second series Land Rover Freelander, in simple and quick steps. First of all we open and lift the bonnet of …read all…
Posted on 17 February 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to remove the headlight of the Land Rover Freelader II
The disassembly of the headlight is very simple to carry out and does not require the disassembly of any other element such as the front bumper; therefore open …read all…
Posted on 5 September 2023 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos