Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Center console tunnel

Land Rover Freelander - Center console tunnel

Center Console Tunnel Land Rover Freelander (2006-2016 / freelander 2)

Land Rover Freelander (2006-2016 / Freelander2)
Replacing the Console and Centre Tunnel on a Land Rover Freelander
Here are the steps to dismantle and replace the console and centre tunnel on a Land Rover Freelander. First, get into the vehicle and start removing the …Read all…
Posted on 12 August 2026 by ScegliAuto
Airbag (1) Car stereo (9) Battery (4) Air vents (2) Control arm (1) Transmission (1) Spark plugs (2) Convertible top (1) Body (2) Key (8) Trunk lock (2) Timing belt (13) V-belt (3) Onboard computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Differential (4) Brake rotors (1) Headlight (3) Tail light (2) Fog lights (1) Diesel particulate filter (1) Air filter (9) Cabin air filter (7) Diesel fuel filter (10) Oil filter (1) Clutch (5) Light bulb (1) Headlight bulb (6) Handle (2) Engine (1) Starter motor (1) Engine oil (3) Power steering fluid (1) Clock (1) Door trim panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (7) Car door (2) Instrument cluster (3) Fuse box (4) Door lock (5) Suspension system (1) Side mirror (1) Warning light – error code (8) (2) Service warning light (20) Engine mount (1) Center console tunnel (1) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos