Do it yourself
Frequently asked questions about cars and motorcycles

Land Rover Freelander - Door panel

Land Rover Freelander (2006-2016 / Freelander2)
How to remove the front door panel in the Land Rover Freelander?

In this tutorial we can see how to remove the front door panel in the Land Rover Freelander 2, a very simple and fast operation. First of all we open the door …read all…
Posted on 13 September 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
Removing the door panel on Land Rover Freelander 2

Remove the central handle cover by levering the slots with a plastic wedge, then unscrew the two bolts below. Similarly, remove the plastic screw cover present …read all…
Posted on 5 March 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
Remove the door panel on Freelander

Do we want to remove the door panel? Uncomplicated operation, let's see how. Let's see how the panel is removed from above the Freelander door. We disconnect …read all…
Posted on 1 March 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to remove the rear door panel of a Land Rover Freelander

Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of the …read all…
Posted on 26 February 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to remove the door panel of a Land Rover Freelander

Before we can start, we will have to go and open the front door of our Land Rover Freelander. We then start by disengaging and removing the door panel inserts, …read all…
Posted on 28 January 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to remove the right front door panel on Land Rover Freelander 2

We perform the disassembly of the front right door panel on Land Rover Freelander 2: disconnect the battery terminals in the engine compartment, with a …read all…
Posted on 24 October 2023 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to remove Land Rover Freelander door panel

Removing the front door panel of this model is extremely simple to carry out but there are some precautions to be observed; even before proceeding with the …read all…
Posted on 22 October 2023 by ScegliAuto

Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos