Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on the Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Door trim panel

Remove the cover of the central handle by levering in the gaps with a plastic wedge, then unscrew the two bolts underneath. Similarly, remove the plastic cover near the opening handle and unscrew the now exposed bolt. Unscrew all other bolts securing the panel, which are clearly shown in the video, then use the plastic wedge again to extract the panel from its seat. Disconnect the cables and you're done. Proceed in reverse when reassembling the panel. Removing the panel is useful if you need to replace the lock or the window regulator motor.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel from a Land Rover Freelander
How to Remove the Rear Door Panel from a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you can start, open the rear door of your Land Rover Freelander. Begin by prying out and removing the insert of the inner handle using a thin …
How to remove the door panel from a Land Rover Freelander?
How to remove the door panel from a Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) Before starting, open the front door of your Land Rover Freelander. Begin by disengaging and removing the inserts and screw covers on the door panel …
How to Remove the Right Front Door Panel on Land Rover Freelander 2
How to Remove the Right Front Door Panel on Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) To remove the right front door panel on the Land Rover Freelander 2, disconnect the battery terminals located in the engine bay. Using a screwdriver,…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos