Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to remove Land Rover Freelander door panel

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Door panel
Operation: How to remove Land Rover Freelander door panel

Removing the front door panel of this model is extremely simple to carry out but there are some precautions to be observed; even before proceeding with the disassembly of the panel, the triangular-shaped plastic covering must be unhooked, which is located in correspondence with the external rear-view mirror and inside which the tweeter is located; it will then be possible to remove the fixing screws of the panel present in correspondence with the central handle; disassembly will then be completed by releasing the pressure locks along the contour, also present along the upper edge.


Posted on 22 October 2023 by ScegliAuto



How to remove the rear door panel of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of t
How to remove the door panel of a Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) Before we begin, we will need to open the front door of our Land Rover Freelander. So let's start by disengaging and removing the inserts and screw c
How to remove the door panel of a Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) Before we can start, we will have to go and open the front door of our Land Rover Freelander. We then start by disengaging and removing the door pane

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos