Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to remove the front door panel in the Land Rover Freelander?

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Door panel
Operation: How to remove the front door panel in the Land Rover Freelander?

In this tutorial we can see how to remove the front door panel in the Land Rover Freelander 2, a very simple and fast operation. First of all we open the door in question, after which we disengage both the small cap placed inside the opening handle and the cover of the support handle and unscrew the screws placed inside them. Then remove the screws placed along the lower and side edges, grab the panel and separate it from the door levering, if necessary, with a spatula. At this point we can unhook the lock rope and the connector of the window regulator console.


Posted on 13 September 2022 by ScegliAuto



How to remove the door panel of a Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) Before we begin, we will need to open the front door of our Land Rover Freelander. So let's start by disengaging and removing the inserts and screw c
How to remove the rear door panel of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of t
How to remove the door panel of a Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) Before we can start, we will have to go and open the front door of our Land Rover Freelander. We then start by disengaging and removing the door pane

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos