Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Diesel particulate filter

Land Rover Freelander - Diesel particulate filter

Diesel Particulate Filter Land Rover Freelander (1997-2006 / freelander 1)

Land Rover Freelander (1997-2006 / Freelander1)
Installing a PDF Emulator with ECU Modification
Remove the battery cover and disconnect the negative terminal by loosening the clamp. Unscrew the screws of the grille under the windscreen to lift it. …Read all…
Posted on 5 February 2026 by ScegliAuto
Airbag (1) Car stereo (9) Battery (4) Air vents (2) Control arm (1) Transmission (1) Spark plugs (2) Convertible top (1) Body (2) Key (8) Trunk lock (2) Timing belt (13) V-belt (3) Onboard computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Differential (4) Brake rotors (1) Headlight (3) Tail light (2) Fog lights (1) Diesel particulate filter (1) Air filter (9) Cabin air filter (7) Diesel fuel filter (10) Oil filter (1) Clutch (5) Light bulb (1) Headlight bulb (6) Handle (2) Engine (1) Starter motor (1) Engine oil (3) Power steering fluid (1) Clock (1) Door trim panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (7) Car door (2) Instrument cluster (3) Fuse box (4) Door lock (5) Suspension system (1) Side mirror (1) Warning light – error code (8) (2) Service warning light (20) Engine mount (1) Center console tunnel (1) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos