Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : -board computer

Land Rover Freelander - -board computer

Land Rover Freelander (2006-2016 / Freelander2)
How to reset maintenance on Land Rover Freelander 2
In this video tutorial we can see how it is possible to reset the service warning light on Land Rover Freelander 2. The first thing to do is vehicle …read all…
Posted on 1 June 2023 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to reset the service light on Land Rover Freelander
To carry out the manual service reset procedure, first get into your car and put the handbrake to work in greater safety. Before performing the service reset …read all…
Posted on 14 December 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to reset the Land Rover Freelander 2 service
To reset the service of the Land Rover Freelander 2 we can proceed as follows: hold down the button under the odometer and at the same time press the start …read all…
Posted on 18 July 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to reset the Land Rover Freelander service
In today's video we see how to remove the annoying expired service notice in your second generation Land Rover Freelander. This operation is necessary after …read all…
Posted on 4 April 2024 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos