Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Onboard computer

In this video tutorial, you will see how to reset the service light on a Land Rover Freelander 2. The first step is to perform maintenance on the vehicle, such as changing the engine oil and filters. After completing the DIY service, get into the vehicle, engage the handbrake, and turn on the ignition without starting the engine. The display will show the message "System check in progress". Press and hold the button located under the speedometer on the right until the display flashes. Continue to hold until it stops flashing; now release the button and then press and hold it again until the reset is complete.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Replace the EGR Valve in a Land Rover Freelander 2
How to Replace the EGR Valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…
How to Maintain the Land Rover Freelander
How to Maintain the Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) In today's video, see how to perform maintenance on the first series of the Land Rover Freelander. Specifically, how to address the exhaust smoke in …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos