Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Oil and Filter on Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

How do you replace the oil and filter on a Land Rover Freelander? First, open the car door and pull up the lever to open the bonnet, then lift the front bonnet. Unscrew the large securing bolt of the container cap where the oil filter is located.

Remove the oil filter containment kit: extract the worn oil filter from inside the container. Raise the car on a jack and unscrew the bolt from the oil sump: allow the fluid to drain into a suitable disposal container.

Refill with new oil inside the engine.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Change the Oil Filter on a Land Rover Freelander
How to Change the Oil Filter on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Do you want to change the oil filter on your car? Let’s look at removing the oil filter on the Freelander. Lift the front bonnet and secure it. Use a…
Change Engine Oil on the Freelander
Change Engine Oil on the Freelander
Land Rover Freelander (1997-2006 / Freelander 1) How to change the engine oil on the Freelander? Open the engine bay and lift the front bonnet. Raise the vehicle on a column lift or a jack and remov…
How to Change the Diesel Filter on Freelander 2
How to Change the Diesel Filter on Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Change the diesel filter on a Land Rover? Remove the diesel filter on Freelander 2. Lift the front bonnet of the car and locate the diesel filter ins…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos