|
Do it yourself
| |||
| ||||
Fitting Wind Deflectors to the Windows of a Land Rover Freelander 2
Model: Land Rover Freelander
Freelander 2
- Years 2006-2016
The wind deflectors fitted to the windows of the Land Rover Freelander 2 prevent wind and rain from entering the cabin when the windows are partially open. These useful accessories are not standard, and you can install them yourself later. Once you have obtained the deflectors, open the package and test the placement before permanently fixing them by taking reference points on the window frames. Start by fitting the front window deflector: clean the surfaces with the supplied wipe, remove the backing from the double-sided tape, position the deflector first at the end of the door and then near the mirror, and press firmly to adhere the adhesive. Move to the rear window, remove the backing from the double-sided tape, and secure it by pressing well. Repeat the same operations on the other side.
Updated on 22 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Land Rover Freelander
(1997-2006 /
Freelander 1)
Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Land Rover Freelander
(1997-2006 /
Freelander 1)
If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, then all you have to do is read the following gu…
Land Rover Freelander
(2006-2016 /
Freelander 2)
This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.191
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |