Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter of the Land Rover Freelander?

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

In order to replace the air filter of the Land Rover Freelander, you will need to open the hood so that you can access the components located inside the engine compartment: on the right side of the engine compartment, you will be able to locate the filter box that will need to be opened in order to remove the filter inside.

At this point, you can proceed by placing the new filter and closing the box again: once the installation is done, you can start the engine to verify that everything is working correctly.


Posted on 26 October 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Land Rover Freelander 2
How to Replace the Cabin Air Filter on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Although the cabin air filter on your Land Rover Freelander 2 is not the easiest to reach, the replacement is still quite simple and quick. Here's ho…
How to Replace the Air Filter on the Land Rover Freelander 2
How to Replace the Air Filter on the Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) In this new mini guide dedicated to your Land Rover Freelander second series (2006-2016), discover how to quickly and safely replace the air filter. …
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos