Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Gear Shift Knob

Land Rover Freelander - Gear Shift Knob

Land Rover Freelander (2006-2016 / Freelander2)
How to change the headrest and gear knob of the Land Rover Freelander automatic transmission.
In this short and simple guide, we will see the steps that will allow us to disassemble and replace the gear shift knob and boot of the Land Rover Freelander. …read all…
Posted on 21 July 2023 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How do you replace the gear knob of the Land Rover Freelander?
To replace the gear knob of the Land Rover Freelander, you need to pry at the base of the leather shift boot, so that you can detach the internal hooks that …read all…
Posted on 1 April 2023 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How do I replace the gear knob on the Land Rover Freelander 2?
To be able to replace the gear knob of the Land Rover Freelander 2 you have to go and pry with an object so that you can remove the plastic cover placed on the …read all…
Posted on 14 October 2022 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
Disassembly of the knob on Freelander
Disassembling the knob of the Land Rover Freelander? Let's see the disassembly of the knob located above the central tunnel of the car. We move the leather cap …read all…
Posted on 5 February 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to replace the gear knob on Land Rover Freelander 2
How to disassemble the shift knob of a Freelander 2. Let's see the removal. To begin with, disconnect the frame of the leather cap with a plastic lever and …read all…
Posted on 27 November 2023 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to replace the gear knob on Land Rover Freelander
Do you want to replace the gear knob on a Land Rover Freelander? Let's see how to do it in this video. With a plastic lever we disconnect the frame of the …read all…
Posted on 26 November 2023 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
Remove the gear knob of a Land Rover Freelander 2
Do we want to replace the gear knob on our Land Rover Freelander 2? Let's see in this video how to do the disassembly. First we grab the knob with both hands …read all…
Posted on 13 October 2023 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos