Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to replace the gear knob on Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Gear Shift Knob
Operation: How to replace the gear knob on Land Rover Freelander

Do you want to replace the gear knob on a Land Rover Freelander? Let's see how to do it in this video. With a plastic lever we disconnect the frame of the leather headset, take the knob in our hands and rotate it to the left and right until it is removed from the shift rod (we remove the lower frame of the headset if we want to replace it). To carry out the assembly, take the new knob and insert it into the rod on the central tunnel, tighten the same in the rod. Finally, we test with the movement of the rod on the central tunnel the correct assembly of the new knob.


Posted on 26 November 2023 by ScegliAuto



How do I replace the gear knob on the Land Rover Freelander 2?
Land Rover Freelander (2006-2016 / Freelander 2) To be able to replace the gear knob of the Land Rover Freelander 2 you have to go and pry with an object so that you can remove the plastic cover pla
Remove the gear knob of a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Do we want to replace the gear knob on our Land Rover Freelander 2? Let's see in this video how to do the disassembly. First we grab the knob with bo
How to change the headrest and gear knob of the Land Rover Freelander automatic transmission.
Land Rover Freelander (2006-2016 / Freelander 2) In this short and simple guide, we will see the steps that will allow us to disassemble and replace the gear shift knob and boot of the Land Rover Fr

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos