Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Freelander - Fuel pump

Land Rover Freelander (2006-2016 / Freelander2)
Guide to disassembling the high-pressure fuel pump of the Land Rover Freelander TD4
Today we will see the main instructions useful for disassembling and replacing the high-pressure fuel pump of the Land Rover Freelander TD4. First, we open the …read all…
Posted on 25 March 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
How to replace the fuel pump of the Land Rover Freelander 1.8
Shortly we will see the instructions that will allow us to disassemble and replace the fuel pump of the Land Rover Freelander 1.8. First, we open the rear …read all…
Posted on 2 March 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
Replace the high pressure fuel pump on the Land Rover Freelander TD4
We see in this video the instructions that will allow us to disassemble and replace the high pressure fuel pump on the Land Rover Freelander TD4. First of all …read all…
Posted on 27 February 2024 by ScegliAuto
Land Rover Freelander (1997-2006 / Freelander1)
Disassembly of the diesel pump on Freelander TD4
Turn off the car and remove the ignition key. Unscrew the bolts of the left rear wheel, lift the car with a jack and remove the wheel itself: the diesel pump …read all…
Posted on 1 January 2024 by ScegliAuto
Land Rover Freelander (2006-2016 / Freelander2)
How to replace the fuel pump on Freelander
The car doesn't work there? Is there no more fuel reaching the engine? Let's see how to replace the fuel pump. We open and lift the tailgate; we remove the …read all…
Posted on 29 November 2023 by ScegliAuto
Airbags (1) Car stereo (10) Battery (5) Air Vents (2) Arm (1) Gearbox (1) Spark plugs (2) Soft top (1) Bodywork (1) Key (7) Locking the trunk (1) Timing belt (13) V-belt (3) -board computer (4) Checks and maintenance (20) Dashboard (1) Bearing (1) Differential (4) Brake discs (1) Headlight (3) Tail light (2) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (7) Diesel filter (8) Oil filter (1) Clutch (4) Light bulb (1) Headlight bulb (5) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Power steering oil (1) Door panel (7) Front bumper (1) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (7) Fuel pump (5) Door (2) Instrument cluster (6) Fuse box (4) Lock (4) Suspensions (1) Engine mount (1) Central tunnel (1) Turbine (1) EGR valve (2) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos