Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Console and Centre Tunnel on a Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Center console tunnel

See other generations:
Video tutorial

Here are the steps to dismantle and replace the console and centre tunnel on a Land Rover Freelander. First, get into the vehicle and start removing the controls located behind the gear lever by prying at the sides; then disconnect the electrical connector found underneath, as shown in the video.

Next, remove the plastic cover located at the base of the gear lever; now detach the controls located behind the centre tunnel, thus removing the entire plastic piece. Apply the reverse procedure for reassembly!


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Dismantle the Car Radio of a Land Rover Freelander
How to Dismantle the Car Radio of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you can start, sit in the driver's seat of your Land Rover Freelander. Begin by unclipping and removing the cover located on the top of the ca…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos