Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Disassembly of the headlights on the Land Rover Freelander 2

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Headlight
Operation: Disassembly of the headlights on the Land Rover Freelander 2

Let's find out how to remove the headlights on the second series Land Rover Freelander, in simple and quick steps. First of all we open and lift the bonnet of our car and immediately start by unscrewing the fixing screws of the front lights, which we find on the upper part, using a 10 mm socket wrench; after which we disconnect the electrical connector of the bulbs that we find on the back to permanently remove the light, as shown in the video. At this point we can go to replace, if necessary, the bulbs or the headlight directly!


Posted on 17 February 2024 by ScegliAuto



How to remove the service belt of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we can start, we will have to go and open the front hood of our Land Rover Freelander. So let's start by disengaging and removing the service
How to replace the EGR valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the front hood and re
How to remove the rear door panel of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos