Do it yourself
| ||||
|
Land Rover Freelander - Video tutorial
Model: Land Rover Freelander
Freelander 2
- Years 2006-2016 In this tutorial we can see how to remove the headlight in the Land Rover Freelander 2, a very simple and fast operation. Before proceeding, make sure that the key is not inserted in order to operate safely. We start by opening the bonnet, then unscrew the two upper bolts with a 10mm socket wrench. Next, we identify the clip on the back of the lighthouse, press it upwards and at the same time pull it towards us. Once this is done, we can disconnect the power connector and extract the headlight from the body. To mount the spare, we follow the reverse procedure.
Posted on 16 July 2022 by ScegliAuto
Removing the headlight of a Land Rover Free Lander 2
Land Rover Freelander (2006-2016 / Freelander 2) The video shows how to remove a headlight from a Land Rover Free Lander 2. It is not difficult to do by yourself and does not take too long. First, o
How to replace the EGR valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the front hood and re
How to remove the service belt of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we can start, we will have to go and open the front hood of our Land Rover Freelander. So let's start by disengaging and removing the service Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |